*The photo includes ‘Additional Burette KF(10mL)'(option). A single burette is equipped as standard.

Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry

Up to 4 titrators , AT-710B potentiometric titrators or MKC-710B Coulometric or additional Volumetric MKV-710B Karl Fischer moisture titrators can be connected and simultaneous measurement is possible

Can resume titration automatically after interruption

Features

• Titrant Information is stored in an IC chip in the burette unit (Smart burette)
• New burette unit
• Up to 4 simultaneous measurements (Simultaneous titrations)
• Can be connected to AT-710B potentiometric titrators or MKC-710B Coulometric Karl Fischer moisture titrators
• The main control unit and a titrator are separately located by wireless (Bluetooth(R))
• Large color TFT-LCD with a touch panel (8.4-inch)
• Two different user levels and permissions
• Measurement results are converted to PDF and can be stored in a USB flash drive
• When using ADP-611 , a patented scan mode automatically determines the optimal evaporation temperature. (Japanese Patent No. 4247093)
• End point detection by compensating liquid resistance is adopted. (Japanese Patent No. 1896338)
• Can resume titration automatically after interruption
• Automatic solvent change unit is included

Specifications

Type	Karl Fischer Moisture Titrator
Model	MKV-710M	MKV-710S
Product configuration	MCU-710M+MKV-710+IDP-100+Automatic Solvent Change unit	MCU-710S+MKV-710+IDP-100+Automatic Solvent Change unit
Measuring method	Karl Fischer Volumetric titration
Measuring range	1) Water content : 0.1 to 500mgH2O (depends on KF reagent factor) 2) Concentration : 10ppm to 100%H2O
Burette precision	10mL burette +/- 0.015mL ; reproducibility +/- 0.005mL
Endpoint detection	By polarized potential level detected with a twin platinum electrode
EP sense method	Detection of potential level maintained during preset end time. End time range : 1 to 99s
Titration form	Normal titration / Back titration (Option additional burette required)
Required solvent	30 to 100mL (in S-type titration vessel)
Method	120
Key operation	Touch panel
Displays	1) 8.4-inch color LCD 800 x 600 dots
	2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French
	3) Simultaneous 4-channel display (Can also display Automatic Potentiometric Titrator simultaneously)	3) 1-channel display
Calculation	Concentration of water content , statistics data processing (mean , SD and RSD) and automatic averaging of blank value and factor value
Data storage	500 samples
GLP conformance	Registration of operator / User group administration Titrant : Reminder of factor measurement date / Alarm to indicate remaining reagent / Reminder of piston replacement date / Reminder of reagent replacement date / History of factor measurement Check performance : Reminder of scheduled check date / Record of check results Management of conduction time : Display of operating time
External I/O	RS-232C port x4 : for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP) , Evaporator USB ×1 : for USB flash drive , A4 printer , Thermal printer , Keyboard , Barcode reader , Foot switch , USB HUB
	LAN ×1 : for Personal computer (PC)	–
Extensibility	Measuring instrument : Automatic Potentiometric Titrator (AT-710) , Karl Fischer Moisture Titrator (MKV-710/MKC-710) Three of these instruments can be added.	–
	Automatic piston burette : Can control max 2 burette drives (Including two built-in burette drives)
	Evaporator ADP-611
Ambient condition	1) Temperature : 5 to 35°C 2) Humidity : 85%RH or below (no condensation)
Power source	AC100 to 240V +/- 10% 50/60 Hz
Power consumption	Main unit : Approx. 30W Printer : Approx. 7W
Dimensions	Touch panel controller : 225(W) x 190(D) x 42(H) mm Titration unit : 141(W) x 292(D) x 367(H) mm (not incl. tubing) Stirrer : 107(W) x 206(D) x 322(H) mm (not incl. Solvent Change unit) Solvent Change Unit : 240(W) x 140(D) x 400(H) mm (not incl. tubing) Printer : 106(W) x 180(D) x 88(H) mm
Weight	Touch panel controller : Approx.1.5kg Titration unit : Approx.4.0kg Stirrer : Approx.2.0kg Solvent Change Unit : Aprox.0.6kg Printer : Aprox.0.4kg
Conformity standard	CE marking EMC : EN61326-1 LVD : EN61010-1 RE Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01