High-performance titrator at a lower price

Reduction of power consumption by 30% compared with the conventional product

Features

• By reviewing the conventional electrolytic control method , reduction of power consumption by 30%
• Field measurements without access to power sources are possible by connecting a commercially available battery
• By connecting an Android device , a titration curve can be displayed in real-time
• Measurement results are converted to PDF and can be stored in a USB flash drive

Specifications

Type	Karl Fischer Moisture Titrator
Model	MKC-710B
Product configuration	MKC-710+IDP-100+Manual Solvent Change Unit
Measuring method	Karl Fischer Coulometric titration
Measuring range	Water content / Bromine index : 10ug to 300mg (depends on reagent)
Measurement cell	2-Component or 1-Component
Precision	Relative standard deviation : less than 0.3% (n=10) *Per KEM standard measurement conditions and standard liquids
Display resolution	0.1ug
Control method	Constant current pulse time contro
Endpoint detection	Alternate current polarization method with a twin platinum electrode
EP sense method	Selective drift stability or limit measurement time
Required solvent	2-Component cell : Anolyte 100mL , Catholyte 5mL 1-Component cell : Anolyte 150mL
Method	20
Key operation	Sheet key
Displays	1) Black and white LED-backlit LCD 2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish 3) 1-channel display
Calculation	Concentration of water content , statistics data processing (mean , SD and RSD) and automatic averaging of blank value and factor value
Data storage	100 samples
GLP conformance	Registration of operator /Record of check results / Record of factor measurement / Management of conduction time
External I/O	RS-232C port x2 : for Dot matrix printer , Electronic balance , Data Capture Software (SOFT-CAP) USB×1 : for USB flash drive , Thermal printer , Keyboard , Barcode reader , Foot switch , USB HUB , Android device
Ambient condition	1) Temperature : 5 to 35°C 2) Humidity : 85%RH or below (no condensation)
Power source	AC100 to 240V +/- 10% 50/60 Hz
Power consumption	Main unit : Approx. 20W Printer : Approx. 7W
Dimensions	Titration unit : 141(W) x 292(D) x 244(H) mm Stirrer : 107(W) x 206(D) x 340(H) mm (not incl. Solvent Change unit) Solvent Change Unit : 240(W) x 140(D) x 405(H) mm (not incl. tubing) Printer : 106(W) x 180(D) x 88(H) mm
Weight	Titration unit : Approx.3.0kg Stirrer : Approx.2.0kg Solvent Change Unit : Aprox.0.6kg Printer : Aprox.0.4kg
Conformity standard	CE marking EMC : EN61326-1 LVD : EN61010-1